Error Code 9E
The dishwasher can't detect enough water inside
Moderate
Address soon - your appliance may not work properly
Also displayed as: 9E
What This Means
Water-level sensor terminal disconnected; Assy Case Sensor defective; Assy Case Brake defective (DW80F800/F600 models); Water level sensor floater obstructed by debris; Main PBA defect
What actually causes this:
The water level sensor got stuck or debris is blocking it
First Thing to Check
Make sure the water supply valve under your sink is fully open
Parts Involved
How to Fix
- 1
1. Check and reconnect water-level sensor connectors
- 2
2. Check Assy Case Sensor — remove foreign material from the floater
- 3
3. If floater is clean and sensor tests normal, replace Assy Case Sensor
- 4
4. If Assy Case Sensor is normal, replace Main PBA
This Error Applies To
Samsung DW80F600UT Series Dishwashers (2014) (2014–present)
Related Error Codes
The water temperature sensor isn't reading correctly
The heating element isn't warming the water
The incoming water is too hot for safe operation
The dishwasher isn't getting enough water
The dishwasher can't drain the water out
Too much water detected inside the dishwasher
Water is leaking inside the base of the dishwasher
A control panel button appears to be stuck