Error Code FC
The drying fan isn't spinning fast enough
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display
What This Means
Dry fan motor defective or failing; Fan motor connector disconnected; Fan blade obstructed by debris; Main PBA fan motor relay defective
What actually causes this:
The drying fan motor is wearing out or something is blocking it from spinning properly
First Thing to Check
If your dishes aren't drying well, this could be the cause — there's no action you can take at home for this one
Parts Involved
How to Fix
- 1
1. Check and reconnect dry fan motor connectors
- 2
2. Check the resistance of the dry fan motor coil (disconnect first) — normal: approximately 150 ohm
- 3
3. Check for obstructions at the fan blade
- 4
4. Check fan motor relay voltage — 120V while operating
- 5
5. If fan motor tests normal, replace Main PBA
This Error Applies To
Samsung DW80R5061U Series Dishwashers (2020) (2020–present)
Related Error Codes
The dishwasher can't drain the water out
Too much water detected inside the dishwasher
A control panel button appears to be stuck
The touchpad and its controller board can't communicate properly
The motor speed controller board isn't responding
The dishwasher isn't getting enough water
The water distribution motor can't find its position
The water temperature sensor isn't reading correctly