Error Code DC
The dishwasher door was opened during the setup process
Minor
Usually easy to fix - may resolve on its own
Also displayed as: DC
What This Means
Door is opened during Smart Install mode; Door latch is out of order
What actually causes this:
Someone opened the door while the dishwasher was running its initial setup test
First Thing to Check
Close the door firmly and press the start button to restart the setup process
Parts Involved
How to Fix
- 1
1. Make sure the door is fully closed and latched before starting Smart Install
- 2
2. Check door latch switch operation
- 3
3. Check door sensing switch — Normal: 10.5-13V when door is open, less than 1V when closed
This Error Applies To
Samsung DW80R706 Series Dishwashers (2019) (2019–present)
Related Error Codes
The main wash pump that sprays water onto your dishes is not working
The heating element is not warming the water during the wash cycle
The motor that directs water to different spray zones is not working properly
The touch buttons and the control board inside the door cannot communicate
The water inside the dishwasher is dangerously hot
The main control board and the motor control board cannot communicate
The drying fan is not spinning fast enough to dry your dishes
The power supply to the dishwasher is not stable