How do I fix error code dC on a Samsung dryers?

1. undefined: 1. Close the door firmly and attempt to run the dryer 2. undefined: 2. Inspect wire terminals in the door sense circuit for loose or open connections 3. undefined: 3. Test door switch continuity with multimeter 4. undefined: 4. If door switch is faulty, replace it

Samsung Dryers2018–present

Error Code dC

Q: What does error code dC mean on a Samsung dryers?

The dryer thinks the door is open while running Door not fully closed or latched; Loose wire terminals at the door sensor circuit; Open wire terminals at the door sensor circuit; Defective door switch

The dryer thinks the door is open while running

Moderate

Address soon - your appliance may not work properly

Also displayed as: dC

What This Means

Door not fully closed or latched; Loose wire terminals at the door sensor circuit; Open wire terminals at the door sensor circuit; Defective door switch

What actually causes this:

Door wasn't closed firmly, or the door switch has gone bad from normal wear.

First Thing to Check

Open and firmly close the door, then try starting it again.

Parts Involved

Door Switch

How to Fix

1
1. Close the door firmly and attempt to run the dryer
2
2. Inspect wire terminals in the door sense circuit for loose or open connections
3
3. Test door switch continuity with multimeter
4
4. If door switch is faulty, replace it

This Error Applies To

Samsung DV22N68 Series Dryers (2018) (2018–present)

Service manual exact match: DV22N685*H*Service manual exact match: DV22N6850HX/A2Service manual exact match: DV22N680*H*Service manual exact match: DV22N6800HW/AC