Error Code bC2
A button on the control panel is stuck or shorted
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Display PCB is loose; Display PCB has a short circuit; Stuck or jammed button on control panel; Moisture or debris on control panel causing false button press
What actually causes this:
A button got stuck from moisture, spilled liquid, or just normal wear over time.
First Thing to Check
Press each button on the control panel a few times to see if any feel stuck or unresponsive.
Parts Involved
How to Fix
- 1
1. Check if any buttons on the control panel are stuck or jammed
- 2
2. Check if the display PCB is loose or has a short circuit
- 3
3. Inspect wiring between control panel and display PCB
- 4
4. Clean the control panel surface to remove moisture or debris
- 5
5. If display PCB circuit is confirmed shorted, replace display PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DV45A6400 Series Dryers (2024) (2024–present)
Related Error Codes
The dryer's internal parts aren't communicating properly
Your dryer is getting the wrong voltage from the outlet
A secondary temperature sensor is giving bad readings
Your dryer is getting the wrong type of electrical power
Your dryer's temperature sensor isn't reading correctly
Your dryer isn't heating properly or is overheating
The door switch isn't working properly
Your dryer detected restricted airflow during a vent test