Error Code bC2
A button on the control panel is stuck or shorted
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Display PCB key circuit is loose or shorted; Stuck button on control panel; Moisture or debris on control panel causing short; Defective display PCB
What actually causes this:
A button got stuck from moisture, spilled liquid, or just normal wear over time.
First Thing to Check
Press each button on the control panel a few times to see if any feel stuck or unresponsive.
Parts Involved
How to Fix
- 1
1. Check if any buttons on the control panel are stuck or jammed
- 2
2. Clean the control panel surface to remove any moisture or debris
- 3
3. Check if the display PCB connections are loose or shorted
- 4
4. Inspect wiring between control panel and display PCB
- 5
5. If PCB is confirmed faulty, replace the display PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DV45R6 Series Dryers (2019) (2019–present)
Related Error Codes
Your dryer is getting the wrong voltage from the outlet
The dryer's internal parts aren't communicating properly
Your dryer is getting the wrong type of electrical power
The dryer thinks the door is open while running
The door switch isn't working properly
Your dryer's temperature sensor isn't reading correctly
Your dryer isn't heating properly or is overheating
A secondary temperature sensor is giving bad readings