Error Code bC2
A button on the control panel is stuck or shorted
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Display PCB is loose; Display PCB key circuit is shorted; Stuck or shorted button on control panel; Display PCB malfunction
What actually causes this:
A button got stuck from moisture, spilled liquid, or just normal wear over time.
First Thing to Check
Press each button on the control panel a few times to see if any feel stuck or unresponsive.
Parts Involved
How to Fix
- 1
1. Check if any buttons on the control panel are stuck or jammed
- 2
2. Check if the display PCB is loose or short
- 3
3. Inspect wiring between control panel and Display PCB
- 4
4. If key circuit is confirmed shorted, replace Display PCB
This Error Applies To
Samsung DVE50T5300 Series Dryers (2019) (2019–present)
Related Error Codes
A secondary temperature sensor is giving bad readings
The dryer thinks the door is open while running
The door switch isn't working properly
Your dryer isn't heating properly or is overheating
Your dryer is getting the wrong voltage from the outlet
The dryer's internal parts aren't communicating properly
Your dryer's temperature sensor isn't reading correctly
Your dryer is getting the wrong type of electrical power