Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Not using regular power source (voltage out of range); Low voltage from utility; Faulty outlet or wiring; PCB or wire harness fault
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Check if power is supplied properly to the dryer
- 2
2. Measure voltage at the outlet: should be 120V/240V for electric, 120V for gas
- 3
3. Check for blown fuse or tripped circuit breaker
- 4
4. Check PCB and wire harness connections
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE52M8650 Series Dryers
Related Error Codes
The dryer's internal parts aren't communicating properly
A button on the control panel is stuck or shorted
Your dryer is getting the wrong type of electrical power
The door switch isn't working properly
A secondary temperature sensor is giving bad readings
The dryer thinks the door is open while running
Your dryer's temperature sensor isn't reading correctly
Your dryer isn't heating properly or is overheating