Error Code dF
The door switch isn't working properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: dF
What This Means
Door sensor unit loose or shorted; Defective door switch giving invalid readings; Wiring fault in door sense circuit
What actually causes this:
The switch that detects whether the door is open or closed has worn out or its connection came loose.
First Thing to Check
Open the door, check for anything stuck in the door latch area, then close it firmly and try again.
Parts Involved
How to Fix
- 1
1. Inspect door sensor unit for loose or shorted connections
- 2
2. Test door switch: Door open — COM-NC (pins 1-3) should be < 1Ohm, COM-NO (pins 1-2) should be infinity
- 3
3. Test door switch: Door closed — COM-NC (pins 1-3) should be infinity, COM-NO (pins 1-2) should be < 1Ohm
- 4
4. If switch readings are inconsistent, replace door switch
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE52M8650 Series Dryers
Related Error Codes
The dryer's internal parts aren't communicating properly
A button on the control panel is stuck or shorted
Your dryer is getting the wrong type of electrical power
A secondary temperature sensor is giving bad readings
The dryer thinks the door is open while running
Your dryer is getting the wrong voltage from the outlet
Your dryer's temperature sensor isn't reading correctly
Your dryer isn't heating properly or is overheating