Error Code -dC-
Partition configuration changed during active cooking cycle
Moderate
Address soon - your appliance may not work properly
Also displayed as: -dC-
What This Means
User manually inserted partition during operation; User manually removed partition during operation; Partition sensor malfunction
What actually causes this:
User error in inserting/removing partition during operation
First Thing to Check
Verify partition is fully inserted and properly seated
Parts Involved
How to Fix
- 1
Verify partition is inserted correctly
- 2
Check partition sensor connection
- 3
Restart oven after partition adjustment
This Error Applies To
Samsung DOC30P977D Series Ovens & Ranges
Related Error Codes
Broil heating element not energizing during self-test
Cooling motor not responding to control signals
Loss of communication between main control and touch display panel
Drain system unable to evacuate water within time limit
Loss of communication between main control board and sub control board
Temperature sensor circuit is open - no resistance reading possible
Main control board temperature sensor reads excessive heat
Gas sensor output voltage out of acceptable operating range