How do I fix error code C-F2 on a Samsung ovens & ranges?

1. undefined: Check whether sub PCB connector has been inserted 2. undefined: Verify ribbon cable from touch panel is connected normally into Sub PCB 3. undefined: If problem persists after reconnecting, replace sub PCB

Samsung Ovens & Ranges

Error Code C-F2

Q: What does error code C-F2 mean on a Samsung ovens & ranges?

Display/touch panel communication lost Sub PCB connector not inserted; Ribbon cable disconnection; Display module failure; Sub PCB malfunction

Display/touch panel communication lost

Critical

Stop using immediately - risk of damage or safety issue

Also displayed as: C-F2

What This Means

Sub PCB connector not inserted; Ribbon cable disconnection; Display module failure; Sub PCB malfunction

What actually causes this:

Loose or disconnected ribbon cable, failed communication circuitry on Sub PCB

First Thing to Check

Check Sub PCB ribbon cable connection

Parts Involved

Sub PCBTouch panel ribbon cableControl box

How to Fix

1
Check whether sub PCB connector has been inserted
2
Verify ribbon cable from touch panel is connected normally into Sub PCB
3
If problem persists after reconnecting, replace sub PCB

This Error Applies To

Samsung DOP36P86DLS Series Ovens & Ranges

Service manual exact match: DOP36P86DLS

Related Error Codes

C-23

Meat probe temperature sensor is shorted

C-30

Main PCB internal temperature sensor failure

C-20

Temperature sensor open or shorted

C-d0

User control button activated continuously

C-21

Oven temperature exceeds 650F (343C) or loses heating control

C-A2

Cooling fan motor unresponsive

C-72

Drain pump inactive or water not draining from steam chamber

C-31

Temperature safety limit exceeded

Need more help with your Samsung ovens & ranges?