Samsung Ovens & Ranges
Error Code C-F0
Sub PCB communication error - Main PCB to Sub PCB communication failure
Moderate
Address soon - your appliance may not work properly
What This Means
Loose or disconnected connector CN500 or CN201; Short circuit at connector CN500 or CN201 pins; Faulty sub PCB; Faulty main PCB; Circuit pattern damage
How to Fix
- 1
Disconnect power
- 2
Remove connectors CN500 and CN201 from sub and main PCB
- 3
Check if harness connected normally to CN500 and CN201
- 4
Check for short circuit between connector pins and PCB
- 5
Repair circuit area having short between connector pins
- 6
Verify pattern is not damaged between micom and connector
- 7
Replace sub PCB and main PCB if all else checks good
This Error Applies To
Samsung NE595R1ABS Series Ovens & Ranges
Service manual exact match: NE59*785***/ACService manual exact match: NE59*785***Service manual exact match: NE595R1ABSR