How do I fix error code C-F0 on a Samsung ovens & ranges?

1. undefined: Check Sub PCB to Main PCB connector (CN470) 2. undefined: Check connector pins on Sub PCB and Main PCB 3. undefined: Verify all harnesses are properly connected 4. undefined: Repair damaged harness or replace 5. undefined: Repair damaged/shorted area between Sub and Main PCB 6. undefined: Check whether everything else is good on Sub PCB and Main PCB 7. undefined: Replace Sub PCB or main PCB if communication still fails

Samsung Ovens & Ranges

Error Code C-F0

Q: What does error code C-F0 mean on a Samsung ovens & ranges?

Main PCB communication failure Sub PCB and Main PCB connector loose; Sub PCB connector damaged; Main PCB connector damaged; Harness disconnected between boards

Main PCB communication failure

Moderate

Address soon - your appliance may not work properly

What This Means

Sub PCB and Main PCB connector loose; Sub PCB connector damaged; Main PCB connector damaged; Harness disconnected between boards

How to Fix

1
Check Sub PCB to Main PCB connector (CN470)
2
Check connector pins on Sub PCB and Main PCB
3
Verify all harnesses are properly connected
4
Repair damaged harness or replace
5
Repair damaged/shorted area between Sub and Main PCB
6
Check whether everything else is good on Sub PCB and Main PCB
7
Replace Sub PCB or main PCB if communication still fails

This Error Applies To

Samsung NE59J7650W Series Ovens & Ranges

Service manual exact match: NE59N6650SG/AAService manual exact match: NE59R6631SG/AAService manual exact match: NE59J7650WSService manual exact match: NE59N6650SG

Related Error Codes

C-20

Oven sensor opened (circuit open)

C-d0

Shorted key (keypad short circuit)

C-d1

Door locking issue (door lock motor malfunction)

C-21

Oven heating over (temperature overshoot)

C-30

PCB temp sensor opened (PCB temperature sensor circuit open)

C-31

PCB temp sensor shorted and PCB temp over during 10 seconds

Need more help with your Samsung ovens & ranges?