Samsung Ovens & Ranges
Error Code C-d1
Door locking issue (door lock motor malfunction)
Moderate
Address soon - your appliance may not work properly
What This Means
Door lock motor harness disconnected; Door lock motor resistance incorrect; Door lock switch not working; Main PCB connector damaged
How to Fix
- 1
Disconnect power and open back cover
- 2
Check harness connection to door lock switch and motor
- 3
Measure door lock motor resistance (normal: 22-28 ohms)
- 4
Activate door lock and measure voltage at wire connection (expect 12V)
- 5
Check if door locking switch is working normally
- 6
Check harness connection to CN201 on main PCB
- 7
Measure resistance of CN201 on main PCB
- 8
Repair damaged harness or replace door lock motor
- 9
Replace main PCB if no problems found elsewhere
This Error Applies To
Samsung NE59J7650W Series Ovens & Ranges
Service manual exact match: NE59N6650SG/AAService manual exact match: NE59R6631SG/AAService manual exact match: NE59J7650WSService manual exact match: NE59N6650SG