How do I fix error code C-30 on a Samsung ovens & ranges?

1. undefined: Disconnect power and open back cover 2. undefined: Remove PCB Main from holder PCB 3. undefined: Measure sensor resistance (normal: 5.4 kohms) 4. undefined: Check sensor connection on Main PCB 5. undefined: Replace PCB Main if resistance abnormal

Samsung Ovens & Ranges

Error Code C-30

PCB temp sensor opened (PCB temperature sensor circuit open)

Moderate

Address soon - your appliance may not work properly

What This Means

Sensor connection loose; Sensor resistance out of range; Main PCB holder connection loose; Defective Main PCB

How to Fix

1
Disconnect power and open back cover
2
Remove PCB Main from holder PCB
3
Measure sensor resistance (normal: 5.4 kohms)
4
Check sensor connection on Main PCB
5
Replace PCB Main if resistance abnormal

This Error Applies To

Samsung NE59J7650W Series Ovens & Ranges

Service manual exact match: NE59N6650SG/AAService manual exact match: NE59R6631SG/AAService manual exact match: NE59J7650WSService manual exact match: NE59N6650SG

Related Error Codes

C-20

Oven sensor opened (circuit open)

C-d0

Shorted key (keypad short circuit)

C-d1

Door locking issue (door lock motor malfunction)

C-21

Oven heating over (temperature overshoot)

C-F0

Main PCB communication failure

C-31

PCB temp sensor shorted and PCB temp over during 10 seconds

Need more help with your Samsung ovens & ranges?