What does error code C-10 mean on a Samsung ovens & ranges?

Gas sensor value out of range (below 5 or above 250) Sensor disconnected; Faulty sensor connection; Defective gas sensor; Main PCB malfunction

How do I fix error code C-10 on a Samsung ovens & ranges?

1. undefined: Check sensor part and connection of sensor housing 2. undefined: Check PCB connector pins 3. undefined: If connections correct, replace cooking sensor 4. undefined: If problem persists, replace Main PCB

Samsung Ovens & Ranges

Error Code C-10

Gas sensor value out of range (below 5 or above 250)

Moderate

Address soon - your appliance may not work properly

What This Means

Sensor disconnected; Faulty sensor connection; Defective gas sensor; Main PCB malfunction

How to Fix

1
Check sensor part and connection of sensor housing
2
Check PCB connector pins
3
If connections correct, replace cooking sensor
4
If problem persists, replace Main PCB

This Error Applies To

Samsung NQ70M7770D Series Ovens & Ranges

Service manual exact match: NQ70M9770DService manual exact match: NQ70M7770D

Related Error Codes

C-d0

Keypad keys are shorted

C-d1

Door lock is mispositioned

C-F0

Communication between Main and Sub PCB is interrupted

-dC-

Partition inserted or removed while oven is operating

C-F2

Communication between Main and Touch PCB is interrupted

C-70

Steam sensor is open or shorted when steam mode is on

C-72

Water draining issue - water level sensor detects remaining water after maximum draining time

C-A2

Cooling motor is operating abnormally

Need more help with your Samsung ovens & ranges?