Error Code C-F0
Communication between Main and Sub PCB is interrupted
Moderate
Address soon - your appliance may not work properly
What This Means
Main PCB connector not inserted correctly; Sub PCB connector not inserted correctly; Faulty Main PCB
How to Fix
- 1
Check Main PCB connector insertion
- 2
Check Sub PCB connector insertion
- 3
Check 8000J Main PCB connector insertion
- 4
Repair damaged harness or replace
- 5
Replace Main PCB if connectors are correct
This Error Applies To
Samsung NQ70M7770D Series Ovens & Ranges
Related Error Codes
Keypad keys are shorted
Door lock is mispositioned
Partition inserted or removed while oven is operating
Communication between Main and Touch PCB is interrupted
Gas sensor value out of range (below 5 or above 250)
Steam sensor is open or shorted when steam mode is on
Water draining issue - water level sensor detects remaining water after maximum draining time
Cooling motor is operating abnormally