Error Code C-d1
Door lock is mispositioned
Moderate
Address soon - your appliance may not work properly
What This Means
Door lock switch not connected; Door lock motor disconnected; Faulty lock motor; Lock switch not working
How to Fix
- 1
Disconnect power and check harness connections to door lock switch and motor
- 2
Measure lock motor resistance (normal 1600-2200Ω)
- 3
Measure voltage at lock motor terminals (normal 120V AC)
- 4
Check door locking switch operation
- 5
Replace lock motor or micro switch if defective
This Error Applies To
Samsung NQ70M7770D Series Ovens & Ranges
Related Error Codes
Keypad keys are shorted
Communication between Main and Sub PCB is interrupted
Partition inserted or removed while oven is operating
Communication between Main and Touch PCB is interrupted
Gas sensor value out of range (below 5 or above 250)
Steam sensor is open or shorted when steam mode is on
Water draining issue - water level sensor detects remaining water after maximum draining time
Cooling motor is operating abnormally