Prax
Sign InGet Started
Samsung Ovens & Ranges

Error Code C-F2

Communication between the Main and Touch PCB is interrupted

Moderate

Address soon - your appliance may not work properly

What This Means

Connector of Sub PCB not inserted; Ribbon cable from touch panel not connected normally to Sub PCB; Damaged wire to touch panel

How to Fix

  1. 1

    Check whether connector of Sub PCB has been inserted

  2. 2

    Disconnect power and unplug connector on Sub PCB

  3. 3

    Check if ribbon cable from touch panel is connected normally into Sub PCB

  4. 4

    Repair damaged wire or replace

  5. 5

    If no issue with connector on Sub PCB, replace Sub PCB

  6. 6

    If problem not solved after replacing Sub PCB, replace control PCB

This Error Applies To

Samsung NV51R5511S Series Ovens & Ranges

Service manual exact match: NV51T5511S*Service manual exact match: NV51R5511S*Service manual exact match: NV51R5511S

Related Error Codes

C-20

Oven sensor is open when the oven is operating

C-d1

Door lock is mispositioned

C-21

Oven sensor is short or internal temperature rises abnormally high when oven is operating

C-F0

Communication between the Main and Sub PCB is interrupted

bAd LinE

Power connection is installed improperly

C-30

PCB temperature sensor is open or shorted when oven is operating

C-A2

Cooling motor is operating abnormally

C-d0

Keys are shorted

Need more help with your Samsung ovens & ranges?