Error Code E-0A

Oven overheating error — oven temperature reaches 650 degrees F (343 degrees C) in any cooking function except Self Clean

What This Means

Temperature reaches 650°F (343°C) in cooking function except Self Clean; Faulty oven temperature sensor; Stuck or failed broil or bake burner; Defective relay assembly

How to Fix

1. 1

   Disconnect electrical power to the range

2. 2

   Remove the upper rear cover panel

3. 3

   Disconnect the two harness connectors to the oven temperature sensor

4. 4

   Measure the oven temperature sensor resistance at room temperature - should be 1080 ohms

5. 5

   Check the broil and bake burners to ensure they are lighting and burning properly

6. 6

   Check whether the DLB, Broil, Bake, and Warming Drawer relay is working normally

7. 7

   Verify all harness connections are properly connected and securely fastened to the PCB

8. 8

   Check the resistance of oven temperature sensor connector on the PCB - normal is 2850 ohms

9. 9

   Replace oven temperature sensor or faulty relay if necessary

This Error Applies To

Samsung NX58H5650W Series Ovens & Ranges (2020) (2020–present)