How do I fix error code C-F2 on a Samsung ovens & ranges?

1. undefined: Check if touch film tail is fully and securely connected to the PCB 2. undefined: Reconnect the touch film tail if loose 3. undefined: If reconnecting does not resolve the issue replace the main PCB 4. undefined: If problem persists after replacing main PCB replace the Assy Control Box

Samsung Ovens & Ranges2023–present

Error Code C-F2

Communication failure between sub-PCB and touch control panel

Moderate

Address soon - your appliance may not work properly

What This Means

Touch film tail not fully seated in connector; Defective main PCB; Defective touch control assembly (Assy Control Box)

How to Fix

1
Check if touch film tail is fully and securely connected to the PCB
2
Reconnect the touch film tail if loose
3
If reconnecting does not resolve the issue replace the main PCB
4
If problem persists after replacing main PCB replace the Assy Control Box

This Error Applies To

Samsung NX60A6711 Series Ovens & Ranges (2023) (2023–present)

Service manual exact match: NX60A6711SSService manual exact match: NX60A6711SGService manual exact match: NX60A6711SBService manual exact match: NX60A6711

Related Error Codes

C-21

Oven overheating – oven temperature rose too high

CtoP

Surface burner knob not in OFF position when self-clean function is initiated

C-20

Oven temperature sensor open (resistance over 2950 ohms) or shorted (resistance under 930 ohms)

C-d1

Door lock malfunction – door locking mechanism failed to operate correctly

Need more help with your Samsung ovens & ranges?