Error Code C-FAN ERROR
The condenser fan motor in the machine room isn't running
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: Fridge 2 C LED blinking
What This Means
Defective fan motor; Contact problem at MAIN PCB connector terminal CN76 pins 7, 8, 10; Contact problem at C-Fan motor connector; Defective motor wire; Feed back signal wire contact defect
What actually causes this:
The motor that cools the condenser in the back or side of the fridge failed or came unplugged
First Thing to Check
Feel for hot air coming from the back or bottom of the refrigerator
Parts Involved
How to Fix
- 1
1. Run Forced Operation mode to verify compressor runs
- 2
2. Check if DC 7-12V is present between MAIN PCB GND and CN76 #8
- 3
3. Verify DC 7-12V between GND and CN76 #8, and lower than DC 2V between GND and CN76 #7
- 4
4. If voltages are correct but fan does not run, replace fan motor
- 5
5. If voltages are incorrect, replace MAIN PCB
This Error Applies To
Samsung RB10FSR4ESR Series Refrigerators
Related Error Codes
The refrigerator temperature sensor isn't reading correctly
The external temperature sensor isn't sending correct readings
The freezer temperature sensor isn't reading correctly
The refrigerator cannot read the room temperature
The freezer cannot read its own temperature
The fridge cannot read its own temperature
The freezer defrost heater isn't working
The defrost system cannot measure its temperature