Error Code 13
Humidity sensor in refrigerator is not working
Moderate
Address soon - your appliance may not work properly
Also displayed as: 13
What This Means
Humidity sensor connector disconnected; Humidity sensor defective or open circuit; Wiring harness damage; Main PCB defect
What actually causes this:
Humidity sensor wire came loose or sensor failed
First Thing to Check
Unplug refrigerator, wait 30 seconds, and plug back in to reset — if error persists, call technician
Parts Involved
How to Fix
- 1
1. Check voltage between Main PCB CN30 pins 7 and 9 — should be within 4.1V to 0.8V range
- 2
2. Reconnect sensor connector if loose
- 3
3. Check wiring harness for visible damage or moisture
- 4
4. Measure sensor resistance with power off
- 5
5. If voltage readings are correct, replace Main PCB
This Error Applies To
Samsung RF22K9581 Series Refrigerators (2016) (2016–present)
Related Error Codes
Freezer temperature sensor is not working
Outside temperature sensor is not working
Ice maker temperature sensor is not working
Refrigerator fan is not working
Convertible zone defrost system secondary error
Refrigerator compartment temperature sensor is not working
Convertible zone temperature sensor is not working
Ice room temperature sensor is not working