Error Code 1C
The washer can't detect the water level properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: 1C
What This Means
Water level sensor defective; Water level sensor terminal not properly connected; Water level sensor hose broken; Main PCB defective
What actually causes this:
The water level sensor connection came loose or the sensor stopped working
First Thing to Check
Unplug the washer, wait a minute, and try again
Parts Involved
How to Fix
- 1
1. Check the water level sensor terminal connections (Blue wire, Orange wire)
- 2
2. Check frequency: approx 26.4 KHz without water (Min 25.9 KHz)
- 3
3. Check the part code of the water level sensor — incorrect part causes abnormal operation
- 4
4. If the water level sensor is defective, replace it
- 5
5. If no problems found, replace the PBA
This Error Applies To
Samsung WA44A3205AW Series Washers (2024) (2024–present)
Related Error Codes
The control boards inside the washer can't communicate
The washer isn't getting enough power
The washer's motor controller can't communicate with the main computer
The washer lid is open while it's trying to run
The laundry load is uneven and the washer can't spin safely
The washer added an extra rinse because the load was uneven
The washer's motor isn't working
The washer isn't filling with water