Error Code LE
Water is leaking inside the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LE
What This Means
Air hose out of place causing water leakage during spin; Water leakage at front with foaming from too much detergent; Connecting hose to detergent drawer connected incorrectly; Foreign material in DV case; Fault of hose or incorrect part engagement
What actually causes this:
A hose came loose, or too much detergent caused foaming overflow
First Thing to Check
Unplug the washer and check for water on the floor
Parts Involved
How to Fix
- 1
1. Check for leakage on base, hose, valve and tub connections
- 2
2. Check drain bellows for foreign material
- 3
3. Check drain motor operation — replace if not operating normally
- 4
4. During natural draining, check if drain bellows clogged
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WA456DRHDS Series Washers (2012) (2012–present)
Related Error Codes
The washer can't detect the water level properly
The washer's motor isn't working
The washer isn't filling with water
The washer can't drain the water out
The control boards inside the washer can't communicate
A button on the washer control panel appears stuck
The washer lid detected an opening while trying to start
The washer door won't unlock after the cycle finishes