Error Code OE
Too much water is in the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OE
What This Means
Water supplied continuously because water level detection doesn't work; Drain hose clogged with injection error at narrow section; Freezing or foreign material in water supply valve; Water level sensor degraded; Water level sensor terminal out of place
What actually causes this:
The water level sensor stopped working and water keeps filling
First Thing to Check
Unplug the washer immediately if you see water overflowing
Parts Involved
How to Fix
- 1
1. If water level sensor has functional error, replace it
- 2
2. Check hose — error occurs if torn or has hole
- 3
3. Check if water is frozen in winter — use hair dryer to defrost
- 4
4. Consider relocating unit to warmer location
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WA456DRHDS Series Washers (2012) (2012–present)
Related Error Codes
The washer can't detect the water level properly
The washer's motor isn't working
The washer isn't filling with water
The washer can't drain the water out
The control boards inside the washer can't communicate
A button on the washer control panel appears stuck
The washer lid detected an opening while trying to start
The washer door won't unlock after the cycle finishes