Error Code CE (Hall)
The washer lost track of the clutch position during operation
Moderate
Address soon - your appliance may not work properly
Also displayed as: CE
What This Means
Clutch hall sensor signal malfunction; Clutch hall sensor connector loose or disconnected; Clutch motor fault; Main PBA fault
What actually causes this:
The clutch position sensor signal was lost while the washer was running
First Thing to Check
Unplug the washer, wait 60 seconds, and plug it back in — if the error returns, it needs service
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connector connections
- 2
2. Check the clutch hall signal at the connector when power is on
- 3
3. If clutch hall signal is abnormal, replace the clutch assembly
- 4
4. If clutch tests normal, replace Main PBA
This Error Applies To
Samsung WA456DRHDW Series Washers (2012) (2012–present)
Related Error Codes
The washer cannot detect how much water is in the tub
The washer's motor cannot spin or is detecting a problem
The washer is not getting enough water to fill
The washer cannot pump the water out
The washer's control boards cannot communicate with each other
A button on the control panel appears to be stuck
The washer does not detect the door as properly closed
The washer cannot unlock the door after a cycle