Error Code Sd
Too many suds were detected and the washer is clearing them
Moderate
Address soon - your appliance may not work properly
Also displayed as: Sd or SUd
What This Means
Too much detergent used; Non-HE detergent used in an HE washer; Detergent residue buildup in the tub
What actually causes this:
Too much detergent was used or you are using regular detergent instead of HE detergent
First Thing to Check
Wait for the cycle to finish — the washer is automatically removing excess suds
How to Fix
- 1
1. Wait for the washer to complete its foam removal process — the normal cycle will proceed automatically
- 2
2. Verify the type and amount of detergent being used
- 3
3. Run a Pure Cycle (tub cleaning) to remove detergent buildup
This Error Applies To
Samsung WA456DRHDW Series Washers (2012) (2012–present)
Related Error Codes
The washer cannot detect how much water is in the tub
The washer's motor cannot spin or is detecting a problem
The washer is not getting enough water to fill
The washer cannot pump the water out
The washer's control boards cannot communicate with each other
A button on the control panel appears to be stuck
The washer does not detect the door as properly closed
The washer cannot unlock the door after a cycle