Error Code 4C2
The cold water hose is hooked up to the hot water faucet.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Cold water supply hose connected to hot water tap; Hot and cold hoses swapped during installation
What actually causes this:
The hot and cold water hoses were accidentally swapped when the washer was installed.
First Thing to Check
Look at the back of the washer and verify the hose labeled 'cold' goes to the cold water faucet.
Parts Involved
How to Fix
- 1
1. Verify the cold water supply hose is connected to the cold water tap
- 2
2. Check that hoses are not swapped
This Error Applies To
Samsung WA46CG3505 Series Washers (2024) (2024–present)
Related Error Codes
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The vibration sensor board has a hardware fault.
The washing machine motor is not spinning or responding properly.
The laundry inside is bunched up on one side, so the washer cannot spin safely.
The washer is getting too much voltage from the electrical outlet.
The washer is not getting enough voltage from the electrical outlet.
The washer's main control board and motor controller cannot talk to each other.