Error Code PC
The washer cannot figure out what position the clutch is in.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC
What This Means
Clutch position sensor malfunction; Clutch mechanism stuck or damaged; Defective main PCB
What actually causes this:
The clutch mechanism that switches between washing and spinning modes is not responding.
First Thing to Check
Unplug the washer for one minute and plug it back in.
Parts Involved
How to Fix
- 1
1. Turn off the washer, unplug it, wait one minute, then plug in again
- 2
2. If the code remains, inspect the clutch assembly and position sensor
- 3
3. Contact Samsung customer service if issue persists
This Error Applies To
Samsung WA46CG3505 Series Washers (2024) (2024–present)
Related Error Codes
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The vibration sensor board has a hardware fault.
The washing machine motor is not spinning or responding properly.
The cold water hose is hooked up to the hot water faucet.
The laundry inside is bunched up on one side, so the washer cannot spin safely.
The washer is getting too much voltage from the electrical outlet.
The washer is not getting enough voltage from the electrical outlet.