Error Code TC2
The temperature sensor for the drying heater is giving bad readings.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC2
What This Means
Dry temperature sensor fault; Condensing sensor fault; Faulty connections of the sensor connector; Main PCB fault; IPM temperature abnormally high
What actually causes this:
The drying temperature sensor has failed or its connector has come loose.
First Thing to Check
Unplug the washer for one minute and plug it back in.
Parts Involved
How to Fix
- 1
1. Check the connections for the dry heater temperature sensor connector
- 2
2. If the dry heater temperature sensor has a functional error, replace it
- 3
3. A TC2 check occurs when the dry/condensing sensor is faulty
This Error Applies To
Samsung WA46CG3505 Series Washers (2024) (2024–present)
Related Error Codes
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The vibration sensor board has a hardware fault.
The washing machine motor is not spinning or responding properly.
The cold water hose is hooked up to the hot water faucet.
The laundry inside is bunched up on one side, so the washer cannot spin safely.
The washer is getting too much voltage from the electrical outlet.
The washer is not getting enough voltage from the electrical outlet.