Error Code 9E2
Your washer is getting too much power from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9E2
What This Means
Consumer power conditions are abnormal; Operating voltage is out of range (over voltage); Plug receptacle is used (extension cord); Main PBA fault (sometimes)
What actually causes this:
The power coming from your outlet is fluctuating or too high — could be a household electrical issue
First Thing to Check
Unplug the washer, wait a minute, and plug it directly into a wall outlet (not an extension cord)
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions — verify operating voltage
- 2
2. Connect a tester to internal power terminals during operation and observe
- 3
3. Check whether an extension cord or plug receptacle is used
- 4
4. If voltage is correct, check Main PBA
This Error Applies To
Samsung WF42H5200A Series Washers (2014) (2014–present)
Related Error Codes
The washer motor is struggling to spin the drum
Your washer can't tell how much water is inside
The incoming water is too hot for the selected cycle
Your washer isn't getting water
Your washer can't pump the water out
Your washer is getting unreliable power from the outlet
A control module inside your washer has lost its connection
The motor speed controller lost its connection to the main control board