Error Code 4C2
The incoming water is too hot for the delicate cycle you selected
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Cold and warm water supply hoses are wrongly engaged into each other; Water temperature sensed as higher than 50°C in Wool or Lingerie courses
What actually causes this:
The hot and cold water hoses are connected backwards — hot where cold should be
First Thing to Check
Check that the hot water hose connects to the hot inlet and the cold hose to the cold inlet
Parts Involved
How to Fix
- 1
1. Verify hot and cold water hoses are connected to the correct inlets
- 2
2. Check incoming water temperature with a thermometer
- 3
3. Ensure hot water line is not crossed with cold water line
This Error Applies To
Samsung WF45K6 Series Washers (2018) (2018–present)
Related Error Codes
The washer's motor controller lost communication with the main board
The washer's door lock mechanism isn't engaging properly
The washer's vibration sensor board has a problem
Your washer is getting too much electrical power
The washer's door relay module lost communication with the main board
The washer's WiFi module lost communication with the main board
The washer's display screen lost communication with the main board
Your washer can't tell how much water is inside the tub