Error Code 8C
The washer's vibration sensor board has a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C / 8C1 / 8C2
What This Means
Error detected in MEMS PBA; Data error detected in MEMS PBA; Wire connection fault to MEMS PBA
What actually causes this:
The vibration sensor (MEMS) inside the washer has a loose connection or has failed
First Thing to Check
Unplug the washer for 60 seconds and plug it back in to reset the electronics
Parts Involved
How to Fix
- 1
1. Check the wire connections to the MEMS PBA
- 2
2. Check for data errors
- 3
3. Replace the MEMS PBA if necessary
This Error Applies To
Samsung WF45K6 Series Washers (2018) (2018–present)
Related Error Codes
The washer's motor controller lost communication with the main board
The washer's door lock mechanism isn't engaging properly
Your washer is getting too much electrical power
The washer's door relay module lost communication with the main board
The washer's WiFi module lost communication with the main board
The washer's display screen lost communication with the main board
Your washer can't tell how much water is inside the tub
The incoming water is too hot for the delicate cycle you selected