Error Code 8C2
The washer's vibration sensor detected a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
Excessive vibration in the unit; MEMS sensor fault; Main PCB fault
What actually causes this:
The washer isn't level on the floor or the vibration sensor on the circuit board failed
First Thing to Check
Check that all four feet of the washer are touching the floor and the washer doesn't rock
Parts Involved
How to Fix
- 1
1. Check unit for excessive vibration — verify washer is level
- 2
2. Check that all shipping bolts have been removed
- 3
3. If vibration is normal, replace the Main PCB
This Error Applies To
Samsung WF50R8500A Series Washers (2019) (2019–present)
Related Error Codes
The washer's motor can't spin properly
The incoming water is too hot for delicate wash cycles
Your washer isn't getting enough electrical power
Your washer is getting too much electrical power
An internal communication module lost its connection
The washer's Wi-Fi module lost its connection to the main board
The washer's display screen lost its connection to the main board
The washer door isn't closing or locking properly