Error Code AC6
The motor controller lost its connection to the main board
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC6
What This Means
Communication error between Inverter PBA and main PBA; Incorrect or loose connector connections between Inverter PBA and main PBA; Faulty soldering on Inverter PBA
What actually causes this:
The connector between the motor controller board and the main board came loose
First Thing to Check
Unplug the washer for 60 seconds and plug it back in to reset the electronics
Parts Involved
How to Fix
- 1
1. Check the connector connections between the Inverter PBA and main PBA carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the Inverter PBA and check for any faulty soldering
This Error Applies To
Samsung WF50R8500A Series Washers (2019) (2019–present)
Related Error Codes
The washer's main computer chip has failed
The washer's motor can't spin properly
The washer's door lock mechanism has a problem
Your washer isn't getting enough electrical power
Your washer is getting too much electrical power
The incoming water is too hot for delicate wash cycles
The washer's display screen lost its connection to the main board
An internal communication module lost its connection