Error Code SDC
The detergent drawer isn't closing or locking properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: SDC
What This Means
Door lock switch terminal of Housing Drawer connected incorrectly; Door lock switch terminal of Assy Housing Drawer is broken; Drawer was pulled by force; Main PCB fault
What actually causes this:
The detergent drawer was pulled too hard or isn't fully pushed in
First Thing to Check
Push the detergent drawer all the way in until you hear it click
Parts Involved
How to Fix
- 1
1. Check the Housing Drawer door lock switch terminal connections
- 2
2. Inspect the Assy Housing Drawer switch terminal for damage
- 3
3. Ensure the drawer is properly seated and not forced
- 4
4. Check Main PCB if other steps are normal
This Error Applies To
Samsung WF50R8500A Series Washers (2019) (2019–present)
Related Error Codes
The washer's main computer chip has failed
The washer's motor can't spin properly
The washer's door lock mechanism has a problem
Your washer isn't getting enough electrical power
Your washer is getting too much electrical power
The incoming water is too hot for delicate wash cycles
The washer's display screen lost its connection to the main board
An internal communication module lost its connection