Error Code 8C
The vibration sensor board has a fault
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
MEMS PBA has a data error; Wire connections to MEMS PBA are loose or disconnected; MEMS PBA is defective
What actually causes this:
The vibration sensor board has a loose wire connection or has developed a fault
First Thing to Check
Unplug the washer for 2 minutes and plug it back in to see if the error clears
Parts Involved
How to Fix
- 1
1. Check the wire connections to the MEMS PBA
- 2
2. Verify connector is properly seated
- 3
3. Replace the MEMS PBA if necessary
This Error Applies To
Samsung WF56H9100A Series Washers (2018) (2018–present)
Related Error Codes
An internal electronic module cannot communicate with the main board
The WiFi module cannot communicate with the main board
The display screen cannot communicate with the main board
The motor speed controller cannot communicate with the main board
The washer's main computer chip has stopped working
The washer's main computer chip has stopped working
The washer's main computer chip has stopped working
The washer cannot detect the water level properly