How do I fix error code AE6 on a Samsung washers?

1. undefined: 1. Check the connector connections between the Inverter PBA and main PBA carefully 2. undefined: 2. Check for incorrect or loose connections 3. undefined: 3. Remove the Inverter PBA and check for any faulty soldering 4. undefined: 4. If connections are good, replace the Inverter PBA or Main PBA

Samsung Washers2018–present

Error Code AE6

The motor speed controller cannot communicate with the main board

Moderate

Address soon - your appliance may not work properly

Also displayed as: AE6

What This Means

Connector connections between Inverter PBA and main PBA are incorrect or loose; Inverter PBA has faulty soldering; Main PBA fault

What actually causes this:

The connector between the inverter board and main board came loose or has a bad solder joint

First Thing to Check

Unplug the washer for 2 minutes and plug it back in to reset the electronics

Parts Involved

Inverter PBAMain PBA

How to Fix

1
1. Check the connector connections between the Inverter PBA and main PBA carefully
2
2. Check for incorrect or loose connections
3
3. Remove the Inverter PBA and check for any faulty soldering
4
4. If connections are good, replace the Inverter PBA or Main PBA