Error Code 9C5
The washer detected an electrical power problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 9C5
What This Means
Abnormal current sensing defect; Consumer power conditions issue; PBA control circuit fault
What actually causes this:
An unstable power supply or voltage fluctuation at the electrical outlet
First Thing to Check
Try plugging the washer into a different outlet or check your circuit breaker
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions — verify proper voltage at outlet
- 2
2. If the PBA control circuit is faulty, replace the PBA
- 3
3. After eliminating PBA, check the AC connector for shorts
- 4
4. If not resolved, replace the Main PBA
This Error Applies To
Samsung WH53DBH700 Series Washers (2024) (2024–present)
Related Error Codes
The dryer is getting an unusual electrical power frequency
The dryer's control board is not receiving the correct voltage
A critical electrical component in the dryer is overheating dangerously
The dryer's safety temperature monitor is not working correctly
The dryer's door switch is not working correctly
The main control board and motor control board cannot communicate
The washer cannot read the water temperature correctly
The dryer thinks its door is open