Error Code bC2
A button on the dryer's control panel is stuck or misreading
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Display PCB is loose; Display PCB is short-circuited
What actually causes this:
A control panel button is stuck or a connector to the display board came loose
First Thing to Check
Check if any buttons on the control panel feel stuck — press each one to make sure they spring back
Parts Involved
How to Fix
- 1
1. Check if the display PCB is loose or short-circuited
- 2
2. Inspect PCB connections
- 3
3. Replace the display PCB if defective
This Error Applies To
Samsung WH53DBH700 Series Washers (2024) (2024–present)
Related Error Codes
The dryer is getting an unusual electrical power frequency
The main control board and motor control board cannot communicate
The washer cannot read the water temperature correctly
The dryer thinks its door is open
The dryer's control board is not receiving the correct voltage
A critical electrical component in the dryer is overheating dangerously
The dryer's safety temperature monitor is not working correctly
The dryer's door switch is not working correctly