Error Code AE6
The motor speed controller has lost contact with the main control board.
Moderate
Address soon - your appliance may not work properly
Also displayed as: AE6
What This Means
Signals between the Inverter PBA and main PBA are not sensed; Incorrect or loose connector connections between the Inverter PBA and main PBA; Faulty soldering on the Inverter PBA
What actually causes this:
A loose connector between the inverter board and the main board, or a failed inverter board.
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the connector connections between the Inverter PBA and main PBA carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the Inverter PBA and check for any faulty soldering
- 4
4. Replace the Inverter PBA or main PBA if needed
This Error Applies To
Samsung WW22K6800AW Series Washers (2015) (2015–present)
Related Error Codes
A door-related communication module has lost contact with the main board.
The washer's vibration sensor board has a problem.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
An internal communication board has lost contact with the main control board.
The washer cannot detect the water level inside the tub.
The washing machine motor is not spinning correctly.