Error Code DE2
The door lock mechanism overheated from too many restarts.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DE2
What This Means
Power switch is turned on/off continually and too much heat is generated; Main PCB fault
What actually causes this:
Repeatedly turning the washer on and off too quickly, which overheats the door lock relay.
First Thing to Check
Unplug the washer for 30 minutes to let it cool down, then try again.
Parts Involved
How to Fix
- 1
1. Allow the washer to cool down and try again
- 2
2. If the error persists, check the main PBA door sensing circuit
- 3
3. Replace the door lock switch or main PCB if faulty
This Error Applies To
Samsung WW22K6800AW Series Washers (2015) (2015–present)
Related Error Codes
A door-related communication module has lost contact with the main board.
The washer's vibration sensor board has a problem.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
An internal communication board has lost contact with the main control board.
The washer cannot detect the water level inside the tub.
The washing machine motor is not spinning correctly.