Error Code OE
The washer is overfilling with water because it cannot sense the correct level.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OE
What This Means
Water is supplied continually because the water level detection does not work; Drain hose is clogged and there is an injection check at a narrow section; Water level detection does not work and water is supplied continually; Water is supplied continually because of freezing or foreign material in the water supply valve; Water level sensor is degraded; Water level sensor terminal is out of place
What actually causes this:
The small rubber air hose connected to the water level sensor has come loose or has a crack, so the sensor cannot detect when the tub is full.
First Thing to Check
Turn off the water supply faucets behind the washer immediately, then unplug the machine.
Parts Involved
How to Fix
- 1
1. Check the hose connected to the water level sensor — check if the hose is torn or has a hole
- 2
2. Check whether the hose is folded, cut, or damaged
- 3
3. If the water level sensor has a functional check, replace it
- 4
4. Check if water is frozen in the hose in winter season — use a hair dryer to defrost
- 5
5. Consider relocating the unit to a warmer temperature location in winter
This Error Applies To
Samsung WW22K6800AW Series Washers (2015) (2015–present)
Related Error Codes
A door-related communication module has lost contact with the main board.
The washer's vibration sensor board has a problem.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
An internal communication board has lost contact with the main control board.
The washer cannot detect the water level inside the tub.
The washing machine motor is not spinning correctly.