Error Code TE2
The washer cannot read the dryer temperature correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TE2
What This Means
Drying heater sensor in the tub has a contact check or temperature sensor fault; Dry heater temperature sensor connector fault; Dry temperature sensor fault; Condensing sensor fault (TE3); Freezing in the winter season
What actually causes this:
A loose or corroded temperature sensor connection for the drying function.
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the connections for the dry heater temperature sensor connector
- 2
2. If the dry heater temperature sensor has a functional check, replace it
- 3
3. A TE2 check occurs when the drying sensor connector is connected incorrectly or has a wire disconnected
This Error Applies To
Samsung WW22K6800AW Series Washers (2015) (2015–present)
Related Error Codes
A door-related communication module has lost contact with the main board.
The washer's vibration sensor board has a problem.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
An internal communication board has lost contact with the main control board.
The washer cannot detect the water level inside the tub.
The washing machine motor is not spinning correctly.