Error Code TE4
An internal power module is overheating.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: TE4
What This Means
IPM temperature is abnormally high; Main PCB fault; Ventilation around the washer is inadequate
What actually causes this:
The washer is in an enclosed space with poor ventilation, causing the power module to overheat.
First Thing to Check
Make sure the washer has at least a few inches of clearance on all sides for airflow, and is not in an excessively hot room.
Parts Involved
How to Fix
- 1
1. Check the ventilation around the washer
- 2
2. Check the IPM module temperature
- 3
3. If the main PCB is faulty, replace it
This Error Applies To
Samsung WW22K6800AW Series Washers (2015) (2015–present)
Related Error Codes
A door-related communication module has lost contact with the main board.
The washer's vibration sensor board has a problem.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
An internal communication board has lost contact with the main control board.
The washer cannot detect the water level inside the tub.
The washing machine motor is not spinning correctly.