What does error code 3C2 mean on a Samsung washers?

The control board cannot properly drive the motor Motor driving signal from PBA is weak; Unstable relay operation; PBA fault

How do I fix error code 3C2 on a Samsung washers?

1. undefined: 1. Check motor power connector terminal connections 2. undefined: 2. Measure motor power housing connector resistance — any 2-pin terminal should read 2.0 to 6.1 Ohm 3. undefined: 3. Replace the main PBA if the motor tests normal

Samsung Washers

Error Code 3C2

The control board cannot properly drive the motor

Critical

Stop using immediately - risk of damage or safety issue

Also displayed as: 3C2

What This Means

Motor driving signal from PBA is weak; Unstable relay operation; PBA fault

What actually causes this:

The main circuit board has a weak signal to the motor

First Thing to Check

Unplug the washer for 60 seconds, then restart

Parts Involved

DIT MotorMain PBA

How to Fix

1
1. Check motor power connector terminal connections
2
2. Measure motor power housing connector resistance — any 2-pin terminal should read 2.0 to 6.1 Ohm
3
3. Replace the main PBA if the motor tests normal