How do I fix error code bC2 on a Samsung washers?

1. undefined: 1. Check whether either the Power switch or a tact switch is continually pressed 2. undefined: 2. Check whether the service PBA holding screws are fastened too much — if so, loosen them a little 3. undefined: 3. Check the contact between the control panel buttons and their corresponding tact switches — there must be a gap between the button and its micro switch 4. undefined: 4. If the main PBA switch IC on/off error has occurred, replace the main PBA

Samsung Washers

Error Code bC2

Q: What does error code bC2 mean on a Samsung washers?

A button on the control panel appears to be stuck A button other than the Power button is continually pressed for more than 30 seconds; Deformation of an internal plastic injection part; Sub PBA assembly screw fastened too tightly; Main PCB relay fault

A button on the control panel appears to be stuck

Moderate

Address soon - your appliance may not work properly

Also displayed as: bC2

What This Means

A button other than the Power button is continually pressed for more than 30 seconds; Deformation of an internal plastic injection part; Sub PBA assembly screw fastened too tightly; Main PCB relay fault

What actually causes this:

One of the buttons on the front panel is physically stuck or the panel is slightly warped

First Thing to Check

Press each button on the control panel to make sure none are stuck down

Parts Involved

Control PanelSub PBAMain PBATact Switches

How to Fix

1
1. Check whether either the Power switch or a tact switch is continually pressed
2
2. Check whether the service PBA holding screws are fastened too much — if so, loosen them a little
3
3. Check the contact between the control panel buttons and their corresponding tact switches — there must be a gap between the button and its micro switch
4
4. If the main PBA switch IC on/off error has occurred, replace the main PBA