Error Code dC2
The door lock area overheated from repeatedly turning the washer on and off
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC2
What This Means
Power switch turned on/off continually causing excess heat; Main PCB fault
What actually causes this:
Someone rapidly turned the washer on and off too many times in a row
First Thing to Check
Unplug the washer for 30 minutes to let it cool, then restart
Parts Involved
How to Fix
- 1
1. Stop toggling the power switch repeatedly
- 2
2. Allow the unit to cool down
- 3
3. Check the main PBA for damage
- 4
4. Replace the main PBA if faulty
This Error Applies To
Samsung WW25B6900AW Series Washers
Related Error Codes
The washer's control board cannot properly measure motor current
The detergent dispenser motor is jammed
The detergent dispenser motor has stopped responding
The fabric softener dispenser motor is jammed
The fabric softener dispenser motor has stopped responding
The sensor that detects the dispenser motor movement has failed
The sensor that measures how much detergent is left has failed
The sensor that measures how much fabric softener is left has failed