Error Code LC
Water is leaking inside the washing machine
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC
What This Means
Heater engagement fault (out of place); Air hose out of place causing leakage during spin cycle; Tub back broken at safety bolts fixing part; Too much detergent causing foaming and front leakage; Connecting hose to detergent drawer connected incorrectly; Drain pump filter cover engaged incorrectly; Water leakage at drain hose; Duct condensing holding screws worn; Nozzle-diaphragm engaged in wrong direction or rubber packaging omitted; Tub back and front screws fastened incorrectly; Leakage sensor faulty
What actually causes this:
A hose connection came loose, the door seal is damaged, or too much detergent created foam that leaked out
First Thing to Check
Check if you are using too much detergent — use only HE (High Efficiency) detergent and the recommended amount
Parts Involved
How to Fix
- 1
1. Check for any leakage on the base, hose, valve, and tub connections
- 2
2. Check the drain motor operation — replace if it does not operate normally
- 3
3. Inspect all hose connections for proper engagement
- 4
4. Check the drain pump filter cover engagement
- 5
5. Check the nozzle-diaphragm direction and rubber packaging
- 6
6. Verify tub back and front screws are properly fastened
This Error Applies To
Samsung WW25B6900AW Series Washers
Related Error Codes
The washer's control board cannot properly measure motor current
The detergent dispenser motor is jammed
The detergent dispenser motor has stopped responding
The fabric softener dispenser motor is jammed
The fabric softener dispenser motor has stopped responding
The sensor that detects the dispenser motor movement has failed
The sensor that measures how much detergent is left has failed
The sensor that measures how much fabric softener is left has failed